User Guide

1716
To view temperature on the primary display with decimal points press
the RANGE key.
If “----" is displayed, it indicates that no probe
is connected (or probe cable is broken).
Note: the RH% value is displayed without any symbol on the
primary display and with a "H" on the secondary LCD. The
temperature value is always displayed together with the "°C"
or "°F" symbol.
To view time and the printing interval press the INTV and RANGE
simultaneously.
To view date, press the UP or DOWN keys.
HI 91610
To view the time press the TIME key. This also displays the printing/
logging interval.
To view the date, press the UP key when the LCD is displaying time.
RANGE
°C
INTV
RANGE
+
INTV
TIME
UP
DATE
DOWN
TIME
INTV
TIME
DATE
UP
To select the hour, press the UP or DOWN keys (24 hour clock).
To set the hour press the TIME key again and the minutes will blink.
Use the UP or DOWN keys to select the correct minutes.
Press the ALT and the TIME keys together to exit this mode and
memorize the minute setting.
The time, date and printing interval are now stored and retained in
the memory even with the meter or display is off.
Note: if the batteries are replaced, the settings will need to be re-
entered. This can be alleviated by applying an external
voltage to the unit before replacing the batteries.
TO VIEW RH%, TEMPERATURE, TIME, DATE &
PRINTING INTERVAL
HI 9161 & HI 9261
When the instrument is turned on the display
will be in TIME mode.
To view RH% on the primary display press the RANGE key.
UP DOWN
TIME
UP DOWN
UP
TIME
ALT
RANGE
INTV
TIME
RANGE