User Guide

ManualsBrandsHanna Instruments ManualsOtherHI 91530K

Dear Customer,

Thank you for choosing a Hanna Instruments Product.

Please read this instruction manual carefully before using the instru-

ment.

This manual will provide you with all the necessary information for

the correct use of the instrument, as well as a precise idea of its

versatility in a wide range of applications.

These instruments are in compliance with directives EN 50081-1

and EN 50082-1.

PRELIMINARY EXAMINATION....................................................... 3

GENERAL DESCRIPTION .............................................................. 3

FUNCTIONAL DESCRIPTION HI 9063 ........................................... 5

FUNCTIONAL DESCRIPTION HI 91530K ....................................... 5

FUNCTIONAL DESCRIPTION HI 91531K ....................................... 6

FUNCTIONAL DESCRIPTION HI 91532K ....................................... 7

OPERATIONAL GUIDE ................................................................. 8

DISPLAY CODES GUIDE............................................................. 12

CALIBRATION........................................................................... 13

BATTERY REPLACEMENT............................................................ 13

ACCESSORIES .......................................................................... 14

WARRANTY.............................................................................. 18

CE DECLARATION OF CONFORMITY............................................ 19

TABLE OF CONTENTSTABLE OF CONTENTS

TABLE OF CONTENTS

ISO 9000 Certified

Company since 1992

PRELIMINARY EXAMINATIONPRELIMINARY EXAMINATION

PRELIMINARY EXAMINATION

Remove the instrument from the packing material and examine it

carefully to make sure that no damage has occurred during shipment.

If noticeable damage is found, notify your Dealer.

Note: Save all packing material until the instrument has been ob-

served to function correctly because all defective items must be

returned to the Dealer in their original packing.

GENERAL DESCRIPTIONGENERAL DESCRIPTION

GENERAL DESCRIPTION

The HI 9063, HI 91530K, HI 91531K and HI91532K are micropro-

cessor-based thermometers that allow temperature measurement using

interchangeable K-type thermocouple probes. The non-linearity of the

temperature probe is linearized by the built-in microprocessor, which

also provides accurate compensation for variations in the measure-

ment circuit and the reference junction.

A wide range of HI 766 K-type thermocouple temperature probe

are available as optional (see Accessories).

Standard features include:

• display and clearing of maximum/minimum temperature mea-

sured (except HI91530K)

• reading hold

• low battery detection

These functions are easily accessible through the waterproof rubber

keypad. Self-explanatory symbols are used to remind the user of the

operating mode or condition.

Upon request these meters, exception made for HI9063, are also

available with a Factory Calibration Certificate against NIST Standard.

Recalibration service is available at your nearest Hanna Service Cen-

ter.