User Guide

29
29
DATA TRANSFER TO PC
HI91410 contains infrared emitting circuitry.
Press the FUNCTION key until "F2" is dis-
played on the secondary LCD.
Place your data-logger on the HI 9200 Infra-
red Transmitter (ensuring that the two infrared
LEDs are placed on top of each other) and
the memory can then be downloaded to your
PC through the HI9200's RS232 port.
During the data transfer the
instrument displays the mes-
sage "r 232".
Using the HI 9200 Infrared Transmitter, all
recorded data can be fed to your Personal
Computer for easy reproduction, storage or
elaboration without the interference of cables
or cords between the meter and the transmit-
ter.
FUNCTION
Untitled-22
30
30
Data transmission from the instrument to the
PC is now much easier with new HI92000
Windows
®
compatible application software of-
fered by Hanna Instruments.
HI 92000 allows you to use the powerful
means of the most spread sheet programs
(e.g.Excel
©
, Lotus 1-2-3
©
). Simply run your
favorite spread sheet and open the file down-
loaded by HI 92000. It is possible to make
any elaboration available with your software
(e.g. graphics, statistical analysis).
User friendly, HI 92000 offers a variety of fea-
tures and has an on line help to support you
throughout any situation.
To install HI 92000 you need a 3.5" drive and
a few minutes to follow the instructions con-
veniently printed on the disk label.
Windows
®
is registered Trademark of "Microsoft Co."
Excel
©
Copyright of "Microsoft Co."
Lotus 1-2-3
©
Copyright of "Lotus Co."