Instruction Manual HI 9043 - HI 9044 HI 9053 - HI 9055 Portable Microprocessor-based K-type Thermocouple Thermometers °C ins rum n s HI 9053 K thermocoup le microprocesso r thermometer ON OFF CLEAR HI LO ALARM SET ENABLE MEMORY MEM HOLD MR ∆M These instruments are in Compliance with the CE Directives http://www.hannainst.
Dear Customer, Thank you for choosing a Hanna Instruments Product. Please read this instruction manual carefully before using the instrument. This manual will provide you with all the necessary information for the correct use of the instrument, as well as a precise idea of its versatility in a wide range of applications. These instruments are in compliance with directives EN 50081-1 and EN 50082-1. TABLE OF CONTENTS Preliminary Examination ............................ 1 General Description ................
FUNCTIONAL DESCRIPTION OF LCD FUNCTIONAL DESCRIPTION OF HI 9043 AND HI 9044 2 1 HI LO M °C °F 3 8 1 HI LO M °C °F HI 9043 and HI 9044 2 2 1 HI LO ∆M °C °F HI 9043 microcomputer K thermocouple thermometer 4 ON OFF 3 °C °F 3 HI 9053 and HI 9055 1. Measurement Scale -50 .. .. +150 °C -58 .. .. +302 °F -50 .. .. +950 °C -58 .. ..+1742 °F 4 5 CLEAR HOLD HI LO 7 6 2. Maximum and Minimum Temperatures 3. Hold Function and Memory Content 4. Visual Alarm Signal. 1.
FUNCTIONAL DESCRIPTION OF HI 9053 ! °F " ! HI LO ∆M °C FUNCTIONAL DESCRIPTION HI 9055 °F ins rum n s HI 9053 K thermocouple microprocessor thermometer ON & " ins rum n s HI 9055 K thermocouple microprocessor thermometer ON CLEAR HI LO ' OFF # HI ALARM $ SET LO ' ALARM ENABLE ( MEMORY % & CLEAR OFF # HI LO ∆M °C SET ENABLE ( MEMORY MR M MEM HOLD $ ) 1. Liquid Crystal Display % MR M MEM HOLD ) 1. Liquid Crystal Display 2. ON/OFF Key 2. ON/OFF Key 3. Max.
SPECIFICATIONS Range Resolution Accuracy Typical EMC Deviation Probe Battery Environment Dimensions Weight Range Resolution Accuracy Typical EMC Deviation Probe Battery Environment Dimensions Weight Range Resolution Accuracy Typical EMC Deviation Probe Battery Environment Dimensions Weight HI 9043 & HI 9044 -50.0 to 150.0°C & -50 to 950°C -58.0 to 302.0°F & -58 to 1742°F 0.1 & 1°C 0.2 & 1°F ±0.
MEASURING SCALE - °C/°F (HI 9043 & HI 9044 only) The meter automatically defaults to the °C scale when turned on. Measurements can be per°C formed in either the Centigrade °F or Fahrenheit scale. To change the scale, press the °C/°F button once. HOLD MODE The reading hold function is activated by the HOLD (HI 9043 and HI 9044) or MEM HOLD (HI 9053 and HI 9055) key. The measured temperature is frozen on the display when this key is pressed. A blinking "M" on display indicates the operation mode.
The flashing "HI •))" and "LO •))" HI •)) alarm indicators request the LO •)) user to opt for the set mode. Select the HI key to enter the HI LO set mode for high temperature point or the LO key for the low temperature limit. If the HI key HI is chosen, the low alarm indicator is switched off and the "HI" indicator appears in the top right corner of the LCD. HI LO Enter the set point value using the * and + keys. Holding the key down enables rapid change.
FUNCTIONAL OPERATION GUIDE Function Key Indicator Remarks Lowest Temperature LO LO Hold to read Highest Temperature HI HI Hold to read Clear HI/LO memories CLEAR "HI/LO" Blinks twice Hold display and memorize it (HI 9053 and HI 9055 only) HOLD (HI9043, HI9044) /MEM (HI9053, HI 9055) "M" Store current reading in memory and freeze it on display HOLD/ MEM Release display with reading retained in memory For HI 9053 and HI 9055 only: Memory recall MR/∆M M Temperatures Difference ∆M MR/∆M
DISPLAY ERROR CODES Display Description Er Input temperature falls out of instrument range Eb Low battery error All segments light up for more than 3 seconds Check the connections and reset the meter by detaching the battery for 10 seconds and then reconnecting it HI 9053 and HI 9055 only: HI"•))" LO •)) Measured value exceeds high alarm set point HI •)) LO"•))" Measured value falls below alarm set point ---M Memory content found empty NOTE: ".....
HI 766PE1 General use probe, max 900°C/1650°F ACCESSORIES K-Type Thermocouple Probes with detachable handle & mini-connector (to be plugged into HI 766HD probe handle): 155mm 6.1" 3mm 0.12" HI 766PA Roller surface probe, max 320°C/600°F HI 766PE2 General use probe, max 900°C/1650°F 200mm 7.8" HI 766PB Surface probe, max 650°C/1200°F 5mm 0.20" HI 766HD Rugged thermocouple probe handle with 1 m (3.
HI 766B1 90° surface probe, max 450°C/840°F HI 766E2 General use probe, max 900°C/1650°F 30mm 1.2" 300mm 11.8" HI 766B2 Surface probe, max 900°C/1650°F HI 766F High temperature wire probe without handle, max 1100°C/2000°F 255mm 10" 8mm 0.3" 1.5mm 0.06" 130mm 5.1" HI 766B3 Small surface probe with insulated shaft, max 200°C/390°F HI 766F1 Flexible probe without handle, max 480°C/900°F 5mm 0.2" 130mm 5.1" HI 766C Penetration probe, max 900°C/1650°F 2mm 0.08" 1m 3.
WARRANTY CE DECLARATION OF CONFORMITY All Hanna Instruments meters are warranted for two years against defects in workmanship and materials when used for their intended purpose and maintained according to instructions. The probes are warranted for a period of six months. This warranty is limited to repair or replacement free of charge. Damages due to accidents, misuse, tampering or lack of prescribed maintenance are not covered.
h t t p : / / w w w . h a n n a i n s t .
