User Guide

ManualsBrandsHanna Instruments ManualsOtherHI 9050

OFF

I 9050

icrocom

puter

therm

eter

°C

∆M

SET

MEM

HOLD

ENABLE

∆M

MEMORY

ALARM

Instruction Manual

HI 9040 - HI 9041

HI 9050 - HI 9051

Portable Microprocessor

Thermistor

Thermometers

http://www.hannainst.com

These Instruments are in

Compliance with the CE Directives

Untitled-5

Dear Customer,

Thank you for choosing a Hanna Product. Please read this instruction

manual carefully before using the instrument. It will provide you with

the necessary information for the correct use of the instrument, as

well as a precise idea of its versatility.

These instruments are in compliance with the

directives

EN 50081-1 and EN 50082-1.

PRELIMINARY EXAMINATION....................................................... 3

GENERAL DESCRIPTION .............................................................. 3

FUNCTIONAL DESCRIPTION LCD .................................................. 4

FUNCTIONAL DESCRIPTION HI 9040 ........................................... 5

FUNCTIONAL DESCRIPTION HI 9041 ........................................... 6

FUNCTIONAL DESCRIPTION HI 9050 & HI 9051.......................... 7

SPECIFICATIONS ........................................................................ 8

OPERATIONAL GUIDE ............................................................... 10

FUNCTIONAL OPERATION GUIDE............................................... 13

DISPLAY CODES ....................................................................... 14

CALIBRATION........................................................................... 14

BATTERY REPLACEMENT............................................................ 15

TEMPERATURE PROBES & ACCESSORIES.................................... 15

WARRANTY .............................................................................. 17

OTHER PRODUCTS FROM HANNA.............................................. 18

CE DECLARATION OF CONFORMITY............................................ 19

TABLE OF CONTENTSTABLE OF CONTENTS

TABLE OF CONTENTS

ISO 9000 Certified

Company since 1992

Summary of content (10 pages)

PAGE 1
Untitled-5 1 2 Instruction Manual HI 9040 - HI 9041 HI 9050 - HI 9051 Portable Microprocessor Thermistor Thermometers Dear Customer, Thank you for choosing a Hanna Product. Please read this instruction manual carefully before using the instrument. It will provide you with the necessary information for the correct use of the instrument, as well as a precise idea of its versatility. These instruments are in compliance with the directives EN 50081-1 and EN 50082-1.
PAGE 2
Untitled-5 3 4 PRELIMINARY EXAMINATION Remove the instrument from the packing material and examine it carefully to make sure that no damage has occurred during shipment. If noticeable damage is found, contact your Dealer immediately. All models, except HI 9041, are supplied complete with an HI 765BL temperature probe. A 9V battery is also included. Note: Save all packing material until you are sure that the meter functions correctly.
PAGE 3
Untitled-5 5 6 FUNCTIONAL DESCRIPTION HI 9040 FUNCTIONAL DESCRIPTION HI 9041 1 1 ins rum n s ON HI 9040 microcomputer thermometer 3 °C °F OFF 2 -50 .. .. +150 C -58 .. .. +302 F ON/OFF RANGE 4 CLEAR HOLD 7 -50°C to 150°C ACCURACY ±0.4°C 5 LO HI 6 Foodcare MICROCOMPUTER THERMOMETER HI 9041 1) Liquid Crystal Display 2) ON/OFF Key 3) Range Selection Key 4) Max./Min. Reset Key 5) Maximum Temperature Key 6) Minimum Temperature Key 7) HOLD Measurement Key.
PAGE 4
Untitled-5 7 8 FUNCTIONAL DESCRIPTION HI 9050 & HI 9051 SPECIFICATIONS Range Resolution Accuracy (@20°C/68°F) Typical EMC Deviation Probe Battery Environment Dimensions Weight 1) Liquid Crystal Display 2) Max/Min Reset Key 3) Max. Temperature/Upper Alarm Value Key 4) Alarm Limits Selection Key 5) Memory Entry and Hold Measurement Key 6) Memory Recall/Temperature Differential Key 7) Activate/Deactivate Alarm Key 8) Min. Temperature/Lower Alarm Value Key 9) ON/OFF Key.
PAGE 5
Untitled-5 9 10 Range Resolution Accuracy (@20°C/68°F) Typical EMC Deviation Probe Battery Environment Dimensions Weight Range Resolution Accuracy (@20°C/68°F) Typical EMC Deviation Probe Battery Environment Dimensions Weight HI 9050 -50.0 to 150.0°C 0.1°C ±0.4°C for one year, excluding probe error ±0.5°C with HI 765BL probe HI 765BL with 1 m (3.3') cable (included) 9V / 300 approx. hours of continuous use 0 to 50°C (32 to 122°F); max 95% RH non-condensing 180 x 83 x 40 mm (7.1 x 3.3 x 1.6") 350 g (12.
PAGE 6
Untitled-5 11 12 ALARM (HI 9050 and HI 9051 only) During the start-up, the alarm is disabled. It ENABLE may be enabled or disabled again by pressing the ENABLE key. Both the high and low setpoints are by default set to 25°C (or 77°F). The alarm is triggered when the measured value is greater than the high setpoint or lower than the low setpoint. In such an instance, the corresponding graphics indicator blinks accompanied by an audible sound.
PAGE 7
Untitled-5 13 14 FUNCTIONAL OPERATION GUIDE Function Key Indicator Remarks Lowest Temperature LO LO Hold down LO to read Highest Temperature HI HI Hold down HI to read Clear HI/LO memories CLEAR "HI/LO" Hold and Memory HOLD (HI 9040) "M" (HI 9050 and HI 9051 HOLD/MEM only) (HI 9050 and HI 9051) Blinks Twice Store reading in memory and freeze it on display Press again to release display with reading retained in memory For HI 9050 and HI 9051 only: On/Off alarm ENABLE HI •)) LO •)) Indic
PAGE 8
Untitled-5 15 16 BATTERY REPLACEMENT The instrument stops operating when the low battery signal is detected. The user is warned of this by the code "Eb". Battery replacement should only take place in a non-hazardous area using an alkaline 9V battery. Remove the battery cover at the rear of the meter and replace the 9V battery with a new one. Press in the battery contacts to make sure they are properly inserted before replacing the cover.
PAGE 9
Untitled-5 17 18 OTHER ACCESSORIES HI 710002 HI 710009 HI 710010 HI 710031 HI 721310 MAN40R2 Soft carrying case (formerly BORGM) Blue rubber boot Orange rubber boot Hard carrying case (formerly PKGCASE) 9V Battery (10 pcs) Instruction Manual WARRANTY All Hanna Instruments meters are warranted for two years against defects in workmanship and materials when used for their intended purpose and maintained according to instructions. The probes are warranted for 6 months.
PAGE 10
Untitled-5 19 20 CE DECLARATION OF CONFORMITY HANNA LITERATURE DECLARATION OF CONFORMITY We Hanna Instruments Srl V.