User Guide

32
PRELIMINARY EXAMINATION
GENERAL DESCRIPTION
Hanna Instruments HI 9032 is a micropro-
cessor-based, bench-top, conductivity meter
designed for the laboratory stringent demands,
with the ability to perform five types of mea-
surements:
• Conductivity (4 different ranges: 0.0 to
399.9 µS/cm, 399 to 3999 µS/cm, 3.99 to
39.99 mS/cm, 39.9 to 99.9 mS/cm)
• Fertilizer Concentration (F1 or F2 in
the range 0.00 to 39.9 g/l)
• NaCl of sea water saturation (range 0.0
to 130.0%)
• Temperature (range 0.0 to 50.0°C)
• Total Dissolved Solids (3 different ranges:
0.0 to 199.9 ppm, 0 to 1999 ppm, 0.00 to
19.99 g/l).
Remove the instrument from the packing ma-
terial and examine it to make sure that no
damage has occurred during shipping. If there
is any damage, notify your Dealer.
Each HI 9032 bench meter is supplied com-
plete with:
• HI 7669/2W Temperature Probe
• HI 7686 Conductivity Probe
• External Power Supply (HI710005 or
HI710006)
• HI 76405 Electrode Holder
• Dust Cover
Note: Save all packing material until you are
sure that the instrument functions cor-
rectly. All defective items must be re-
turned in the original package together
with the supplied accessories.
ins
e
rum n
s
ISO 9000 Certified
Company since 1992
Dear Customer,
Thank you for choosing a Hanna Instruments
Product.
Please read this instruction manual carefully
before using the instrument.
This manual will provide you with all the neces-
sary information for the correct use of the
instrument, as well as a precise idea of its
versatility in a wide range of applications.
This instrument is in compliance with CSA, UL
and (EN 50081-1 and EN 50082-1) direc-
tives.
Preliminary Examination ............................. 3
General Description ..................................... 3
The Front Panel .......................................... 5
Liquid Crystal Displays................................ 7
The Rear Panel ........................................... 8
Specifications ........................................... 10
Operational Guide ......................................11
Conductivity Calibration ............................. 21
NaCl Calibration ........................................ 31
Fertilizer Calibration .................................. 35
Setting Temperature .................................. 40
Setting Temperature Coefficient ................. 42
Setting TDS Factor ................................... 45
Programs .................................................. 47
Interface with PC ....................................... 54
Probe Maintenance ................................... 59
Accessories .............................................. 60
Warranty ................................................... 62
CE Declaration of Conformity .................... 63
TABLE OF CONTENTS