User Guide

33
• The calibration is now complete and the instrument is ready for
use. All subsequent measurements will now be compensated to
25°C (77°F).
• If the instrument will not calibrate refer to the Probe Maintenance
and Cleaning section (see page 46).
• If the HI8936 transmitter is not used in conjunction with the
HI8931 controller, connect the transmitter to an external power
supply (see page 19). Connect the transmitter to the HI7635
conductivity probe (see page 23) and to an ammeter (see page
19).
The calibration of the transmitters with LCD (HI8936AL, HI 8936BL,
HI8936CL, HI 8936DL) does not require an ammeter.
Follow the above calibration procedure performing the operations
referred to the HI8936 transmitter only.