User Guide

• The reading will be converted to mA by the following formula:

mA = K (measured value x 16/2000) + 4

K = conversion factor depending on the model

Model Conversion factor K

HI 8936A & AL 10

HI 8936B & BL 100

HI8936C & CL 1

HI8936D & DL 10

For example, using a HI8936A, if the measured value is 123.4

mS, then

output current = 10 x (123.4 x 16/2000) + 4

= 13.9 mA

Adjust the SLOPE trimmer of the

HI8936 transmitter to read "13.9

mA" on the ammeter or the reading

displayed by the HI8733 conduc-

tivity meter on the HI8936L dis-

play. E.g. "123.4 mS".

• Adjust the SLOPE trimmer of the HI 8931 controller until the

controller reading is the same as the reading displayed by the

HI8733 conductivity meter. E.g. "123.4 mS".