User Guide

TEMPERATURE PROBES &

ACCESSORIES

Hanna Instruments offers a wide range of probes to meet your needs

to measure the temperature in air, surface, penetration and liquid

applications. These probes use highly sensitive thermistor sensors

which provide greater accuracy, faster response and a temperature

range that is superior to conventional thermistor probes. HI765 series

temperature probes are supplied pre-calibrated from the factory with

±0.4°C accuracy and are ready to use. The probes are easily

connected to your meter with a standard connector. Completely

interchangeable, these probes make it possible for you to switch from

one to another without wasting time and money going through time-

consuming and tedious calibration procedures. They are available in

different handle colors to avoid cross contamination during testing:

HI 765A Air probe, with 1 m (3.3') cable and white handle

HI 765A/10 Air probe, with 10 m (33') cable and white handle

HI 765BL General purpose liquid probe, with 1 m (3.3') cable

and black handle

HI 765BL/10 General purpose liquid probe, with 10 m (33') cable

and black handle

HI 765L General purpose liquid probe, with 1 m (3.3') cable

and white handle

HI 765L/10 General purpose liquid probe, with 10 m (33') cable

and white handle

HI 765PBL Penetration probe with 1 m (3.3') cable and blue

handle

HI 765PBL/10 Penetration probe with 10 m (33') cable and blue

handle

HI 765PG Penetration probe with 1 m (3.3') cable and green

handle

HI 765PG/10 Penetration probe with 10 m (33') cable and green

handle

HI 765PR Penetration probe with 1 m (3.3') cable and red

handle

HI 765PR/10 Penetration probe with 10 m (33') cable and red

handle

HI 765PW Penetration probe with 1 m (3.3') cable and white

handle