User Guide

CE DECLARATION OF CONFORMITY
17
HI 8564 HI 93640
DECLARATION OF CONFORMITY
We
Hanna Instruments Srl
V.le delle industrie 12
35010 Ronchi di Villafranca (PD)
ITALY
herewith certify that the thermo-hygrometers
have been tested and found to be compliant with the following regulations:
IEC 801-2 Electrostatic Discharge
IEC 801-3 RF Radiated
EN 55022 Radiated, Class B
Date of Issue: 12-10-1995
D.Volpato - Engineering Manager
On behalf of
Hanna Instruments S.r.l.
Recommendations for Users
Before using these products, make sure that they are entirely suitable for the environment in which
they are used.
Operation of these instruments in residential area could cause unacceptable interferences to radio and
TV equipments, requiring the operator to take all necessary steps to correct interferences.
In HI 8564 the trimmers are sensitive to Electrostatic Discharge. It is recommended to use an
antistatic screwdriver during calibration.
Any variation introduced by the user to the supplied equipment may degrade the instrument's EMC
performance.
To avoid electrical shock, do not use these instruments when voltages at the measurement surface
exceed 24VAC or 60VDC.
To avoid damages or burns, do not perform any measurement in microwave ovens.
16
OTHER PRODUCTS FROM HANNA
• Chemical Test Kits
• Conductivity and TDS Meters
• Dissolved Oxygen Meters
• Dosing Pumps
• Electrodes (pH and ORP)
• Hygrometers
• Ion Specific Meters
• Magnetic Stirrers
• pH Meters
• Printing and Logging Meters
• Process Instrumentation
• Solutions and Accessories
• Testers (pH, conductivity, temperature,
pNa, TDS, ORP)
• Thermometers