User Manual

ManualsBrandsHanna Instruments ManualsSensorsHI 8050

−

LinkLink

Link - The selectable program (number) after which the filter-cleaning pro-

gram is activated.

−

ilter Number ilter Number

ilter Number - Panel index. Two filter selectable.

−

Clean on alarmClean on alarm

Clean on alarm - The filter-cleaning program can be set to be activated

by an alarm condition alone or in addition to being linked to a specific

program. Enter Y (yes) or N (no).

−

Clean timeClean time

Clean time

- Selectable work duration for the indexed filter cleaning program.

SET AGITATORS – S46 (Only for HI8050)

Pre 00:33 Prog 08

Work 00:10

Pause 00:05

SET AGITATORS S46

The agitators can be activated before dosing the fertilizer, during dosing, or

intermittently throughout the program. If ‘Pre’ is set, the agitator will activate

prior to dosing. If ‘Work’ is set without ‘Pause’ the agitator will work through-

out the lifetime of the program. If ‘Work’ and ‘Pause’ are set the agitator will

function intermittently relative to the time settings. In this panel the program

number is used as the index.

This panel displays and allows the setting of the following parameters:

−

rere

re - The selectable pre-activation time for the agitator. The pre-agitation is

done only if the program has pre-irrigation and during that period.

−

Program Number Program Number

Program Number - Reflects the selected program (can be selected only

inside panel C04).

−

orkork

ork - The selectable activation time for the indexed agitator. Working time

during irrigation.

−

auseause

ause - The selectable pause time following work time setting.

MANUAL START – S47

Active program: 03

Start program: -- ?

PROG MAN START S47

Each program can be manually started using this panel. If certain alarm condi-

tions are present such as “no water supply”, a program cannot be started by any

means. This panel displays and allows the setting of the following parameters:

−

Active programActive program

Active program - The currently active program.

−

Start programStart program

Start program - The program selected for activation. User selectable.