User Manual

ManualsBrandsHanna Instruments ManualsSensorsHI 8050

−

ConcConc

Conc – specify the active substance concentration of the fertilizer solution.

It is used only in weight mode.

FERT VOL CTRL – S42

Tank:Fert1 Prog:01

Fert: 00300L

Water:0500000L

FERT VOLUME CTRL S42

This panel controls the dosing of fertilizer in the volume mode. This fertilizer

dosing mode works only if the controller is in volume mode. For this mode the

volume of fertilizer solution is specified together with the quantity of water for

which is needed. The valve number indexes this panel. This panel displays

and allows the setting of the following parameters:

−

ankank

ank - Panel index. Specify the fertilizer for which the dosing prescription is

made

− −

−

Program Number - Program Number -

Program Number - Current selected program. Represents the program

for which the fertilizer prescription is made.

−

FertFert

Fert – the amount of fertilizer solution needed.

−

aterater

ater – the amount of water needed for the fertilizer solution specified

above.

SET SECTORS – S43

Valve 05 Prog 07

Sector 01 Total 03

Value: 000310L

SET SECTORS S43

Each valve can be set for the indicated program using this panel. The panel

allows the setting of the sector (label) number for each valve. This number can

be unique for each valve or a number of valves can be assigned the same

sector number and grouped. A value in time or volume is entered to deter-

mine the duration or amount of activation. Once a value is entered the valve

it is considered assigned to the indicated program and added to the total

number of valves displayed on the panel. To remove valves from a program

simply enter zeros in the value setting.

The valve number indexes thisThe valve number indexes this

The valve number indexes this

panel.panel.

panel. This panel displays and allows the setting of the following parameters:

−

alvealve

alve - Panel index.

−

Program NumberProgram Number

Program Number

−

SectorSector

Sector - Selectable sector (label) number for each valve. Unique or similar

numbers can be assigned to the valves.