User Manual

SET START TIME – S33

Prog 07

07:00 09:20 10:30

12:00 14:00 16:00

SET START TIME S33

If time is selected as the starting trigger for an indexed program, up to six

different starting times within the daily schedule limits (see panel

S29S29

S29 (ACTIVE

TIMETABLE)) can be selected. The program number indexes this panel. This

panel displays and allows the setting of the following parameters:

−

rogram Numberrogram Number

rogram Number - Panel index (used to view settings for all programs).

−

Start timesStart times

Start times - Six individual (selectable) hour settings for program start

within daily schedule limits for indexed program.

SET PROGRAM REPEATS – S34

Prog 07

Repeats 04

Pause 00:30:00

PROGRAM REPEATS S34

Once a program is triggered it is possible to set it to repeat by using this

panel. The program number indexes this panel. This panel displays and al-

lows the setting of the following parameters:

−

rogram Numberrogram Number

rogram Number - Panel index (used to view settings for all programs).

−

RepeatsRepeats

Repeats - Selectable number of repetitions following the initial execution of

the indexed program.

− Pause - Selectable amount of delay time between repetitions.

PRE/POST IRRIG – S35

Prog 07

PreIrrig: 015000L

PostIrrig: 010000L

PRE/POST IRRIG S35

Prior to after the execution of the indexed program an amount of pre and post

irrigation water can be specified in time or volume. To set irrigation control

mode see panel S55 (IRRIG CTRL MODE). The program number indexes this

panel. This panel displays and allows the setting of the following parameters: