User Manual

ManualsBrandsHanna Instruments ManualsSensorsHI 8050

−

eekdayeekday

eekday - Weekday labels

−

orkdayorkday

orkday - Use yes or no indication (on keypad) below each weekday label

to indicate specific workdays for the indexed program.

SET PRIORITY – S31

Prog 07

Priority 04

Sector/Group 08

SET PRIORITY S31

This panel allows the setting of priority level for each program. Programs can

share the same priority level. When a conflict occurs between two programs

with the same priority, the program with the earliest starting time will execute

first. The program number indexes this panel. This panel displays and allows

the setting of the following parameters:

−

P P

rogram Numberrogram Number

rogram Number - Panel index (used to view settings for all programs).

−

PriorityPriority

Priority - The priority level. This number can be set from 1 to 6 with 6 being

the highest priority.

−

Sectors / GroupSectors / Group

Sectors / Group - The maximum number of sectors that can be open in

the same time by the indexed program.

START CONDITIONS – S32

Time cond:Y Prog 07

Link 02

Ext Tank: Y

START CONDITIONS S32

How a particular program is triggered (started) can be selected with the use of

this panel.

Multiple start conditions can be chosen for a programMultiple start conditions can be chosen for a program

Multiple start conditions can be chosen for a program

in the same time.in the same time.

in the same time. By this panel a program can be set to activate at a

certain time, by the level of the external tank, or directly after the completion of

another program. The program number indexes this panel. This panel dis-

plays and allows the setting of the following parameters:

−

Time condTime cond

Time cond - Time condition start. On keypad select Y for yes or N for no.

−

rogram Numberrogram Number

rogram Number - Panel index (used to view settings for all programs).

−

Ext tank - Ext tank -

Ext tank - By selecting external tank trigger, the start of the program is

based on the level of the external tank.

−

LinkLink

Link - By selecting Link and entering a master program number, the start of

the selected program directly follows (linked to) the completion of its mas-

ter program.