User Manual

ManualsBrandsHanna Instruments ManualsSensorsHI 8050

once the numeric date is entered and confirmed.

−

TimeTime

Time - Hour / Minute / Seconds format. The time is automatically updated

once the numeric time is entered.

− −

−

System clock.System clock.

System clock.

ACTIVE TIMETABLE – S29

BetWeen Prog 07

Date: 01-04 31-10

Time: 07:00 23:00

ACTIVE TIMETABLE S29

This program allows the user to set the scheduled limits for the indexed pro-

gram. The program number indexes this panel. This panel allows the setting

of the following parameters:

−

rogram Numberrogram Number

rogram Number - Panel index (used to view settings for all programs).

−

DateDate

Date - The yearly schedule limits for the selected program. This sets the limit

of program operation between (day / month) and (day / month).

−

TimeTime

Time - The daily schedule limits for the selected program. This sets the limit

of program operation hour (hour) and (hour).

WORKDAYS – S30

Work day 02 Prog 07

Rest day 03

Weekday SMTWTFS

WORKDAY YNYYNNY S30

This panel allows the user to set a workday scheduled for the indexed pro-

gram. Once the yearly and daily limits are established for the indexed pro-

gram using the previous panel, two methods can be used to set up a consis-

tent work schedule. Workdays and rest days or simply stated “days on” and

“days off” are selectable. For example, if 2 workdays and 3 rest days are

selected, the index program will run 2 days on and 3 days off (not run) con-

tinuously within the daily and yearly limits. If the application requires specific

week days of execution then specific workdays are selectable by entering a Y

(yes) or N (no) under the day of choice. Only one of the methods can be used

for each program. By setting one of the two choices the other is deactivated.

The program number indexes this panel. This panel displays and allows the

setting of the following parameters:

−

ork dayork day

ork day - The number of consecutive workdays.

−

rogram Numberrogram Number

rogram Number - Panel index (used to view settings for all programs).

−

Rest dayRest day

Rest day - The number of consecutive rest days.