User Manual

ManualsBrandsHanna Instruments ManualsSensorsHI 8050

− −

−

System clockSystem clock

System clock

REMINDER: In CONSULTING MODE the ESC key can be used as a

shortcut key to access this panel from any panel.

PH STATE – C05

Prog 08 Ref=06.4pH

pHout:06.4pH 13:15

PH STATE C05

The purpose of this panel is to allow the user to inspect the current pH refer-

ence point for a specific program and the real time pH sensor readings. The

program number indexes this panel. This panel contains the following infor-

mation:

−

Program NumberProgram Number

Program Number – The current selected program. Act as index for the

panel (used to view settings for all programs).

−

RefRef

Ref = Reference or set point pH value for the specified program.

−

PhoutPhout

Phout - Real time value of pH sensor. This reading applies to the entire

process and is not program specific.

− −

−

System clockSystem clock

System clock

EC STATE – C06

Prog 08 Ref=05.6mS

ECin :01.1mS

Count:02.0mS 13:15

EC STATE C06

The purpose of this panel is to allow the user to inspect the current EC refer-

ence point for a specific program and the real time EC sensor readings. The

program number indexes this panel. This panel contains the following infor-

mation:

−

rogram Numberrogram Number

rogram Number - Panel index (used to view settings for all programs).

−

RefRef

Ref - Reference or set point EC value for the specified program.

−

EcoutEcout

Ecout - Real time value of EC sensor. This reading applies to the entire

process and is not program specific.

− EC in - Real time value of EC input sensor. This sensor measure the conduc-

tivity of the incoming water supply. This reading applies to the entire

process and is not program specific.

− System clock