User Guide

HI 721314 Rugged carrying case for HI 8734 measuring

340x230x90 mm complete with TDS calibration solu-

tion (HI 7032S, 120 mL) and screwdriver

HI 731326 20 small screwdrivers, length 90 mm, for calibration

purposes (except for HI 8033)

HI 710007 Blue shockproof rubber boot for HI 933000

HI 710008 Orange shockproof rubber boot for HI 933000

HI 710009 Blue rubber boot for HI 8033, HI 8633, HI 8733 and

HI 8734

HI 710010 Orange rubber boot for HI 8033, HI 8633, HI 8733

and HI 8734

MANCONDR2 Instruction manual

WARRANTYWARRANTY

WARRANTY

All Hanna Instruments meters are warranted for two years against

defects in workmanship and materials when used for their intended

purpose and maintained according to instructions. The electrodes

and the probes are warranted for a period of six months. This

warranty is limited to repair or replacement free of charge.

Damages due to accident, misuse, tampering or lack of prescribed

maintenance are not covered.

If service is required, contact the dealer from whom you purchased

the instrument. If under warranty, report the model number, date of

purchase, serial number and the nature of the failure. If the repair is

not covered by the warranty, you will be notified of the charges

incurred. If the instrument is to be returned to Hanna Instruments,

first obtain a Returned Goods Authorization number from the Cus-

tomer Service department and then send it with shipping costs prepaid.

When shipping any instrument, make sure it is properly packaged for

complete protection.

To validate your warranty, fill out and return the enclosed warranty

card within 14 days from the date of purchase.

All rights are reserved. Reproduction in whole or in part is prohibited

without the written consent of the copyright owner,

Hanna Instruments Inc., 584 Park East Drive, Woonsocket, Rhode

Island, 02895 , USA.

Hanna Instruments reserves the right to modify the design, construc-

tion and appearance of its products without advance notice.