User Guide

21
Rinse the probe with tap wa-
ter after every series of
measurements. If a more thor-
ough cleaning is required,
remove the PVC sleeve and
clean the probe with a cloth or
a non-abrasive detergent.
When reinserting the sleeve
onto the probe, be sure that
the sleeve is in the right direc-
tion with the four holes towards
the cable end.
After cleaning the probe, re-
calibrate the instrument.
The probe body is in PVC. For
this reason it must never come
into close contact with a heat
source. If the probe is exposed
to high temperatures (above
50°C/122°F), the rings might
become loose or detached, re-
sulting in a serious impairment
of the probe. In such cases,
the probe has to be replaced.
PROBE MAINTENANCEPROBE MAINTENANCE
PROBE MAINTENANCEPROBE MAINTENANCE
PROBE MAINTENANCE