User Guide

• Once a value is set, press the CFM key to confirm. The

instrument will turn to the next item and the new item’s

value will be displayed on the primary LCD.

• If a wrong value is confirmed, the

WRONG indicator starts blinking,

the new value is not accepted and

the instrument will not switch to the

next item until a correct value will

be confirmed.

• Instead of selecting the item manually, it is possible to cycle

through all the items of a selected group by pressing re-

peatedly CFM key. The procedure to modify the item’s value

is the same described above.

If the last item of the group is reached, by pressing the

CFM key again the primary display will show the group

name and it will be possible to change the group by press-

ing the  or  key.

Note At any time for exiting the setup mode press (ALT+) SETUP. If

no modification has been confirmed, no setup item is

changed.

Note While in the setup mode, if no activity is performed for about

5 minutes after entering the setup mode, the mode is auto-

matically exited and the instrument returns to the previous

mode.