User Guide

72
By pressing the  key, the first digit will be fixed on and it will
be possible to select the next digit.
When the fourth digit is reached, by pressing the  key again,
the number on the primary display will scroll of one position
to the left and the fifth digit of the phone number will be
shown on the fourth position. The minus sign in the front of
the number disappears because the shown digits are not the
first four ones anymore.
By pressing the  or  key it is possible to modify the value
of the blinking digit and pressing the  key it is possible to
skip to the next digit. When the end of the phone number is
reached, the user has to fill the remaining positions with “-”
character.
The space reserved for a phone number is of 20 digits. When
the last position is reached, by pressing the  key, the pri-
mary display will return to the first four digits (recognizable by
the minus sign in the front of the number). In this way it is
possible to run cyclically through the number by pressing
repeatedly the  key.