User Guide

• When the whole password has been in-

serted, press CFM to confirm it.

Note The default password is set at “0000”.

ENTERING SETUP ITEMS

After confirmation of the password the

primary LCD will show the name of the

first setup group (see table) while the

secondary LCD will display the setup

code of the first item of the group.

• By pressing the  or  key it is possible to cycle through

the setup groups; the secondary LCD will always show the

code of the first item of the group.

• Once a group is selected, it is pos-

sible to choose an item manually.

Pressing the  key, the first digit of

the setup code will start blinking.

Now it is possible to change its value

by pressing the  or  key.

• Pressing the  key again, the first

digit will be fixed while the second

digit starts blinking and its value can

be changed as described above.

• By pressing the  key again all the

digits will be fixed.

• If CFM key is pressed, the selected item is confirmed; the

secondary LCD will show the setup item code while the

primary LCD will display the current item value.

If a fixed set of values is available for the selected item, use

the  or  key to switch between them.