Owner manual

5
V. V.
V. V.
V.
Equipment requiredEquipment required
Equipment requiredEquipment required
Equipment required:
• Hanna HI 5315 double junction reference electrode
with HI 7075 fill solution for measurements with
HI 4010.
• Hanna HI 4222 pH/ISE/mV meter or other suitable
ion or pH/mV meter. (Note: log/linear graph paper is
useful if an ISE (ion) meter is not available.
• Hanna HI 180 magnetic stirrer or equivalent with
stirring bars (HI 731320). (Note: isolate beakers from
stirrer motor heat by placing insulating material such
as foam or cork between them).
• Hanna HI 76404 electrode holder or equivalent.
• Plastic beakers (HI 740036P) or other suitable mea-
surement vessel.
VI. VI.
VI. VI.
VI.
Solutions RequiredSolutions Required
Solutions RequiredSolutions Required
Solutions Required
Standard for Fluoride Measurements
Select appropriate Hanna Instruments standard and ISA
from the list below: Part number
0.1 M Sodium Fluoride, 500 mL HI 4010-01
100 ppm, 500 mL HI 4010-02
1000 ppm, 500 mL HI 4010-03
10 ppm with TISAB II, 500 mL HI 4010-10
1 ppm with TISAB II, 500 mL HI 4010-11
2 ppm with TISAB II, 500 mL HI 4010-12
ISA
TISAB II, 500 mL HI 4010-00
TISAB II, 1 gallon HI 4010-05
TISAB III , 500 mL HI 4010-06
KIT: HI 4010-30
Contains four 500 mL bottles of:
TISAB II HI 4010-00
10 ppm with TISAB II HI 4010-10
1 ppm with TISAB II HI 4010-11
*
*
*
*
*
Standards that are asterisked contain TIASB II and are
ready to use withour further additions.
*