User Manual

44
Language
Focus on the Language item.
Use the desired function key to change the option. Wait until new
language is loaded. If language load fails the instrument will try to
reload current language.
If any language can’t be loaded, the instrument will work in safe mode.
In this mode all messages are displayed in English and HELP is not
available.
Temperature unit
Focus on the Temperature Unit item.
Press the displayed function key in order to change the temperature unit.
Beep On
Focus on Beep On item.
Press the displayed function key to enable/disable beep.
When enabled, beep sounds as a short beep every time a key is pressed
or when the calibration can be confirmed.
A long beep alert means that the pressed key is not active or a wrong
condition is detected while in calibration.