Owner manual

See the following pages for specifications of

each model.

The capacity is referred to stirring water with

a viscosity of 0.001 N·s/m

at 25ºC.

Specifications for all models

Speed ON/OFF and continuously

Control variable with potentiometer

knob

Drive Direct drive D.C. Motor with

magnet

Power 4 W

Consumption

Torque 85 g·cm

Delivered

Power 115 or 230 Vac, 50/60 Hz

Supply depending on models

Fuse 400 mA/250 V; 20x5 mm

Stirring Bar Teflon

coated,

L 50 x dia 7 mm

FUNCTIONAL DESCRIPTION

AND SPECIFICATIONS

1. ON/OFF switch for power supply

2. Fuse holder for 400 mA/250 V fuse

3. AC power cord.

Unplug the stirrers from the power sup-

ply before replacing the fuse.

ELECTRICAL CONNECTIONS

ACCESSORIES

HI 731320 Magnetic stir bar (10 pcs)

Recommendations for Users

Before using these products, make sure that they are entirely suitable for the

environment in which they are used.

Operation of these instruments in residential area could cause unacceptable

interferences to radio and TV equipments, requiring the operator to take all necessary

steps to correct interferences.

Any variation introduced by the user to the supplied equipment may degrade the

instruments' EMC performance.

Unplug the stirrers from the power supply before replacing the fuse.

To avoid damages or burns, do not place these stirrers in microwave ovens.