Owner manual

Setup mode allows viewing and modification of the following parameters:

• Calibration Expiration Alarm

• Current Time (hour & minute)

• Current Date (year, month & day)

• Beep Status

• Instrument ID

• Temperature Unit

To enter the Setup mode press the SETUP key while the instrument is in

measuring mode. Press SETUP key to exit SETUP mode.

Select a parameter with the ARROW keys.

Press the CAL key to change a parameter value. The selected parameter

will start blinking.

Press the RANGE key to toggle between the displayed parameters.

Press the ARROW

keys to increase or decrease the displayed value.

Press the CFM key to save the modified value or the CAL key to escape

without saving.

CALIBRATION EXPIRATION ALARMCALIBRATION EXPIRATION ALARM

CALIBRATION EXPIRATION ALARM

Press the CAL key when the calibration expiration is displayed. Calibration

time out (“OFF” or “1” to “7” days) will begin blinking.

Press the ARROW

keys to change the calibration expiration value.

Press the CFM key to save the modified calibration expiration value or

press the CAL key to cancel without saving the calibration expiration.

CURRENT TIMECURRENT TIME

CURRENT TIME

Press the CAL key when the current time is displayed. The hour will

start blinking.

Press the ARROW

keys to change the hour.

Press the RANGE key. The minutes will start blinking.

SETUPSETUP

SETUP