User's Manual

• Press

to enter log interval edit menu and use

or to adjust the logging start-stop time or the log

sampling. Press

to save the current value and use

or to adjust next / previous parameter.

• Press to exit log interval edit menu and then press

to save the current log.

• While the instrument is saving the data, a “Please wait...”

pop-up message will be displayed on the LCD.

LOGGING MODE 2 (DO only)

This logging mode can be used for multiple samples measurement.

By choosing this logging mode,

and will be

available in

Measure

mode.

To log data using this mode:

• Press

while in

Measure

mode to start the logging

session. When the measured value is frozen on the LCD by

pressing

and the stability criterion is reached, the

logged value is the one that has been frozen on the LCD until

returning to normal logging mode by pressing

The “Logging” and “AutoHold” indicators will be displayed on

the LCD.

• To store another frozen value, press again.

• To stop the logging session, press