User's Manual

27
Logging Data Configuration
This option allows the user to select the parameters that accompany a
logged value: Date/Time, Calibration Data, Sample ID , Instrument ID ,
Operator ID , Company Name , Aditional Info 1 and Aditional Info 2 .
To customise the logging data configuration:
• Use
or to highlight the Logging Data
Configuration
option.
• Press
and then use or to enable
the parameter by selecting
Yes or to disable it by selecting No for
each option.
• Press
to return to the previous menu.
Sampling Period
This option allows the user to select the desired sampling period for
automatic logging.
To set the sampling period:
• Use
or to highlight the Sampling Period option.
• Press
and use or to select the
desired option from
1, 2, 5, 10, 30 seconds.
• Press
to confirm your selection or press to
cancel operation.
New Lot
Accessing this option, the new manually logged readings will be put in a new log lot.
To generate a new lot:
• Use
or to highlight the New Lot option.
• Press
to generate a new manual lot. A pop-up menu will be displayed to ask for confirmation.
• Press
to confirm or press to escape without saving and return to the Log options.
Note: The
New Lot option is available only for manual logging.