User Guide

Manganese HR

• Wait for a few seconds and the display will

show “-0.0-”. Now the meter is zeroed

and ready for measurement.

• Remove the cuvet.

• Add the content of one packet of

HI 93709A Citrate reagent. Re-

place the cap and shake gently

until dissolution is complete.

• Add the content of one packet of

HI 93709B Sodium Periodate re-

agent. Replace the cap and shake

gently until dissolution is com-

plete.

• Reinsert the cuvet into the instrument.

• Press TIMER and the display will show the countdown prior to the

measurement or, alternatively, wait for 1 minute and 30 seconds

and press READ DIRECT. In both cases “SIP” will blink during

measurement.

• The instrument directly displays concentration in mg/L of manganese

on the Liquid Crystal Display.

INTERFERENCES

Interference may be caused by:

Calcium above 700 mg/L

Chloride above 70000 mg/L

Iron above 5 mg/L

Magnesium above 100000 mg/L.