User Guide

BRAVO

type specified in this instruction

sheet.

ACCESSORIES:

HI 76504/P3 3 x 1.4V batteries

SUGGESTIONS FOR USERS:

Before using this product, make sure that it is entirely

suitable for the environment in which it is used.

Operation of this instrument in residential areas could

cause interference to radio and TV equipment.

Any variation introduced by the user to the supplied

equipment may degrade the instrument's EMC

performance.

To avoid electrical shocks, do not use this instrument

when voltage at the measurement surface exceeds

24 VAC or 60 VDC.

To avoid damage or burns, do not perform any

measurement in microwave ovens.

OPERATION:

• Turn the BRAVO

on.

• Immerse BRAVO

your sample. Under no

circumstances im-

merse above the maxi-

mum immersion or

display level.

• When not in use,

switch the BRAVO

off.

BATTERY REPLACEMENT:

Replace the batteries when the

display fades or BRAVO

cannot

be switched on.

Pull the battery com-

partment out. Insert 3

new 1.4V batteries

while paying attention

to their polarity.

Batteries should only

be replaced in a safe

area using the battery

ISTRBRAVO 02/97

Visit our Internet Home Page:

http://hannainst.com

Untitled-1.p65 8/22/2003, 2:21 PM2