User Manual

31
SETUP
• To enter/exit SETUP, press SETUP/DEL.
• To select the parameter to be edit, press UP or
DOWN keys until the desired panel is displayed.
SET EPA COMPLIANCE MODE
When EPA compliance reading is ON, “EPA” message
is displayed on the secondary LCD and the reported
values are rounded to meet EPA reporting
requirements.
• To edit the EPA mode, press CAL when EPA
compliance reading panel is displayed.
The parameter setting and “CFM” tag will start
blinking.
• Press the UP or DOWN keys to set ON or OFF
the EPA compliance mode.
• Press LOG/CFM to save the setting. The new
selected option of the parameter will be
displayed on the LCD.
Alternatively, press CAL to exit without saving
the new settings.
SET BEEPER
The HI 98703 has a built-in beeper that signals
the tag read, the key press and the error conditions.
The beeper can be selected to be ON or OFF.
• To set the beeper ON/OFF, press CAL when set
beeper panel is displayed.
The beeper status and “CFM” tag will start
blinking.
Setup mode allows viewing and modifying the instrument parameters.
The blinking “CAL” tag during setup mode suggest to press CAL for parameters editing.