Bluetooth Audio S350 User Manual
Foreword Thank you for choosing the Bluetooth audio produced by our company. In order to let you experience the product easily, it is equipped with detailed instructions for use, from which you can obtain knowledge about the product introduction, use methods and other aspects. Please read the instructions carefully before you use this machine. If there are any printing errors or translation errors, please forgive us.
Do not disassemble, repair or modify by yourself. Do not use the audio and headset when riding bikes, driving cars or motorcycles to avoid danger. ● Do not listen at a large volume to avoid adverse effects on your hearing. ● Waste packaging, batteries and electronic products used should be sorted and disposed properly. ● ● Features [Bluetooth Audio] Bluetooth 5.0, with a receiving distance of 10-15 meters. [Digital Music] Sound card digital signal input, easy sound source equipment with computer light.
[Built-in EQ] Built-in four different styles of EQ curves. [Pulsator Switch] The mechanical pulsator switch shall be used for switching on/off and mode switching. Music-playing Operation When the machine is powered on, it defaults to the Bluetooth mode. When a USB is inserted into, it will automatically identify and play. With the priority principle of the latter, it can switch playing mode by the user; Insert the audio signal line to switch automatically.
Function Definition of Product Buttons and Jacks ①③ ⑤ ⑥ ②④ ⑦ ⑧⑨⑩ 1. [Start-up] Pulsator Up: to start the equipment. 2. [Shutdown] Pulsator Down: to shut down the equipment. 3. [Bluetooth Mode] it defaults to be AUXIN status when the pulsator is in the middle, and it switches to Bluetooth mode when pulsator is upward. 4. [Sound Card Mode] it defaults to be AUXIN status when the pulsator is in the middle, and it switches to the sound card mode when the pulsator is downward.
5. [Volume Knob] It rotates from left to right, and the volume increases linearly; press it briefly to pause. 6. [EQ Switch] It includes 4-gear potentiometer: EQ1-COMPORT, EQ2-CLEAR, EQ3-BEAT and EQ4-FLAT 7. [AUXIN Block] It is externally connected with analog audio signal. 8. [USB Block] It can read USB and sound card. 9. [TAPE_C Block] 12V power input. 10.
Bluetooth Connection Methods 1. When the pulsator switches to Bluetooth mode after starting up, the machine will send out a prompt tone, and the status indicator light will flash quickly. 2. Turn on the Bluetooth function of mobile device (mobile phone, computer, etc.) and search for Bluetooth. 3. After manual clicking, the device will automatically pair and connect. If the connection is successful, the machine will send out a prompt tone, and the blue light will always be on.
Specifications RMS: 10W Frequency response: 55Hz-18KHz Signal-to-noise ratio: ≥85dBA Distortion:＜10% Audio input: Bluetooth, AUX, USB, sound card Support MP3: bit rate, 32Kbps-320Kbps Horn impedance: 4Ω Input power: external DC12V Adjustment mode: pulsator adjustment, knob adjustment Input sensitivity: 500±50mV Packaging Accessories Bluetooth audio Adapter USB sound card data cable Audio cable User Manual – 07 – 1 1 1 1 1
FCC Caution This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
