User's Manual

34
TROUBLESHOOTING
Problem
Possible Cause
Countermeasure
The power does not turn on
Device is not properly connected
• Check to see that the device has been properly connected.
The system does not play
The vehicle battery is low
• Charge the battery If the problem persists, contact your
point of purchase or service center.
Sound does not work
• The volume level is set to the lowest level
• The connection is not proper
• Adjust the volume level.
• Check to see that the device has been properly connected.
The sound or image quality is low
• Vibration is occurring from where the conversion switch has
been installed
• Image color/tone quality is low
• The sound may be short circuited and the image distorted if
the device vibrates.
• The device will return to normal once vibrations stop.
The USB does not Work
• USB memory has been contaminated
• A separately purchased USB HUB is being used
• A USB extension cable is being used
• A USB which is not a Metal Cover Type USB memory is
being used
• An HDD type, CF SD memory is being used
• Remove any foreign substances on the contact surface of
the USB memory and multimedia terminal
• Directly connect the USB memory with the multimedia
terminal on the vehicle
• Directly connect the USB memory with the multimedia
terminal on the vehicle
• Use standard USB Memory
• Use standard USB Memory
The iPod is not recognized even though
it has been connected
• There are no titles which can be played
• The iPod firmware version has not been properly updated
• The iPod device does not recognize downloads
• Use iTunes to download and save MP3 files into the iPod
• Use iTunes to update the firmware version and reconnect
the iPod with the device
• Reset the iPod and reconnect with the device
Bluetooth does not work or its limited
functions are available
• Bluetooth on your mobile phone is set to OFF
• The Bluetooth connection is not made
• Set it to ON
• Make the connection active