Specifications

ManualsBrandsHank ManualsData Input DevicesHDMI 1.3b Splitter

HSP0104AS Operating Instruction

Function

HANK Electronics ltd www. hank- tech. com 2008

HDMI Classic Splitter

Model NO. : HSP0104AS

PICTURE

Dear customer:

Thank you for purchasing this product. For optimum performance and safety, please read these

instructions carefullybefore connecting, operating or adjusting product.

Please keep this manual for future reference.

NOTICE

HANK Electronics ltd reserves the right to make changes in the hardware, packaging and any

accompanying documentation without prior written notice.

WARNING:

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR PRODUCT DAMAGE:

1.Do not expose this apparatus to rain, moisture, dripping or splashing and make sure that no objects

filled with liquids,such as vases, are placed on the apparatus.

2.Do not install or place this unit in a bookcase, built-in cabinet or in another confined space. Ensure

the unit is well ventilated.

3.To prevent risk of electric shock or fire hazard due to overheating, do not obstruct the unit's ventilation

openings with newspapers, tablecloths, curtains and similar items.

4.Do not install near any heat sources such as radiators, heat registers, Stoves or other apparatus.

5.Do not place sources of naked flames, such as lighted candles on the unit.

6.Clean this apparatus only with dry cloth.

7.Unplug this apparatus during lighting storms or when unused for a long time

8.Protect the power cord from being walked on or pinched, particularly at plugs.

9.Only use attachments/accessories specified by the manufacture

10.Refer all servicing to qualified service personnel.

*1 input HDMI signal can split to 4 HDMI signal sink devices simultaneously

*HDMI 1.3 protocol compliant

*HDCP 1.2 protocol compliant

*Support deep color 36bit

*DTS-HD/true-HD/LPCM7.1/AC3/DTS/DSD audio format

*Full-HD 1080P/1600X1200UXGA

*Capable for up to 6 times cascade without any transmission lost

Summary of content (6 pages)

PAGE 1
HSP0104AS Operating Instruction HDMI Classic Splitter Model NO. : HSP0104AS PICTURE Function *1 input HDMI signal can split to 4 HDMI signal sink devices simultaneously *HDMI 1.3 protocol compliant *HDCP 1.2 protocol compliant *Support deep color 36bit *DTS-HD/true-HD/LPCM7.1/AC3/DTS/DSD audio format *Full-HD 1080P/1600X1200UXGA *Capable for up to 6 times cascade without any transmission lost Dear customer: Thank you for purchasing this product.
PAGE 2
HSP0104AS Operating Instruction TABLE OF CONTENTS Introduction --------------------------------- 3 Package contents--------------------------- 3 Panel Descriptions-------------------------- 3 Connect and Operation--------------------- 4 Specification----------------------------------4 Typical Application---------------------------5 Product Service------------------------------ 5 Warranty-------------------------------------- 5 2 HANK Electronics ltd www.hank-tech.
PAGE 3
HSP0104AS Operating Instruction INTRODUCTION HANK's HSP0104AS is a full routing type 1-by-4 HDMI Classic Splitter. It allows any source (Blue-Ray player,HD DVD player, satellite receiver, game system, etc.)to be shown on any display no matter the source is HDCP or not. Extra infrared receiver extension,RS232 port and CAT5e port are supplied for remote control. HSP0104AS has the ability of equalization and amplification to ensure HDMI signal's transmission through long cable without quality loss.
PAGE 4
HSP0104AS Operating Instruction Back panel Output4 Output3 Output2 Input Output1 1 2 3 1.output port 1-4 2.input port 3.Power CONNECT AND OPERATION 1. Connect the HDMI input sources(such as HD-DVD,PS3,STB etc) into HSP0104AS. 2. Connect the HDMI outputs (such as HD-LCD, HD-DLP) into HSP0104AS. 3. Power on the input source you want to show. (Keep the unused input power off, otherwise it may interfere the normal display.) 4. Connect the power supply into HSP0104AS.
PAGE 5
HSP0104AS Operating Instruction Typical Application Product Service 1) Damage requiring service: The unit should be serviced by qualified service personnel if: a. The DC power supply cord or AC adaptor has been damaged; b. Objects or liquids have gotten the unit; c. The unit has been exposed to rain; d. The unit does not operate normally or exhibits a marked change in performance; e. The unit has been dropped or the cabinet has been damaged.
PAGE 6
HSP0104AS Operating Instruction Mail-In Service Mail-In Service When shipping the unit, carefully pack and send it prepaid, adequately insured and preferably in the original carton. Include a letter detailing the complaint and provide a day phone and/or email address where you can be reached. If repair is needed during the limited warranty period the purchaser will be required to furnish a sales receipt/proof of purchase indicating date of purchase, amount paid and place of purchaser.