User Manual

Note:
*Make sure the device and APP work in same Wi-Fi configuration mode, both in EZ
mode or in AP mode. Refer to
Section 3 product description LED indicator part to
check which state the device is working with.
*In some case that the EZ mode is not working Wi-Fi network, AP mode is the only
option.

EZ mode: make sure your APP is internet available and device and APP both work
in EZ mode. Then input the Wi-Fi network password to finish the device adding. If
you want to change the Wi-Fi network, please check the “Change network” in
APP;

AP mode: Click AP Mode, make sure your APP is internet available and device and
APP both work in AP mode. Confirm to input the SSID and Password of Wi-Fi
network, then select the Device AP name with SmartLife-xxxx in Wi-Fi list then
back to App to finish the device adding.