User Manual

 Flash once in Blue: Wi-Fi connected and water leak detected;
 Flash once in Dual-Color: Wi-Fi disconnected and water leak detected;
2) Probe: extend to detect the water leak;
3) Buzz vent: Sounds while water leak detected;
4) Button: Press and hold the button for 5 seconds to enter into Wi-Fi connection (or
configuration). The red LED indicator will blink rapidly (EZ mode) or slowly (AP mode).
EZ mode connection is set as default in Wi-Fi configuration. Press and hold the
button for 5 seconds will enable the device switch between EZ mode and AP mode.
Note:
1) To check the device is working or not: short-cut the probe, the LED indicator will
flash and the Buzz will works;
2) To check the device is Wi-Fi connected or not: if the LED indicator turns purple, the
device is non Wi-Fi connected. If the LED indicator turns blue, the device is Wi-Fi
connected.
4. SPECIFICATIONS
Power supply
2*AAA battery , 3V
Wireless frequency
2.4GHz ~ 2.484GHz
Network protocol
IEEE802.11 b/g/n
Transmitting power
802.11b:17dBm±2dBm@11Mbps
802.11g:15dBm±2dBm@54Mbps
802.11n:13dBm±2dBm@MCS7_HT20
Receiving sensitivity
802.11b:-91dBm@11Mbps 8%PER
802.11g:-75dBm@54Mbps 10%PER
802.11n:-72dBm@MCS7_HT20 10%PER
Vector error EVM
802.11b:≤35%
802.11g:-28dBm max.
802.11n:-28dBm max.@MCS7_HT20
Working temperature
-10 ~ +40℃
Storage temperature
-20 ~ +60℃
Relative humidity
8% ~ 80%
5. INSTALL APP AND REGISTER AN ACCOUNT
5.1 Scanning the following QR code to download APP for Android and iOS System. Or
you can download the APP named as “Smart Life” from Apple store and Google Play.
5.2 Launch the APP and register an account with your email address then login;
i) Download APP and install ii) Register the APP