User Manual

08
12
Seng up Camera3 Installing Camera4
09 10 11
Make sure that the mounng surface is strong enough to hold at
least three mes the weight of the camera.
Follow the steps below to add the camera to your Imou account.
Step 1 Scan the following QR code or search "Imou Life" in Google
Play or App Store to download and install the app.
Step 5 Follow the on-screen prompts to add the camera. Repeat
the adding process if you have mulple cameras.
Step 2 Launch the app. Then create an account if you are a new
user.
Step 3 Connect the camera to power source with the power
adapter.
Step 4 Aer the camera boots up, the LED indicator light flashes
green (wire-free camera) or is on solid green (wired camera).
If you already use the app, make sure that you are using the
latest version.
If the LED indicator status goes wrong, reset the camera.
Select Wi-Fi
Wi-Fi XXXXXX1
Wi-Fi XXXXXX2
Wi-Fi XXXXXX3
...
Wi-Fi Password
To paste the device firmly, clean and dry the mounng
surface in advance.
Use Mounng Adhesive
Step 1 Peel off the mounng adhesive and sck it to the boom of
the camera.
Step 2 Press and hold the device against the installaon area for
10 seconds and then release.
Step 3 Power on the camera and then adjust its angle properly.
Use Mounng Plate
Step 1 Peel off the mounng template and sck it to the desired
installaon area.
Step 2 Drill holes into the mounng surface as the mounng
template marks and then insert wall anchors as needed.
Step 3 Secure the mounng plate to the mounng surface with
included mounng screws.
Step 4 Put the camera onto the mounng plate and ensure they
aract to each other.
Step 5 Power on the camera and then adjust its angle properly.
FAQ5
Q: The device cannot boot up or work as expected?
Check the LED indicator status. If the light is not in green, press
and hold the reset buon for 10 s to reset the camera.
Q: How to connect the camera to another Wi-Fi network?
If the camera is online, select Device Details > Network
Config to change the Wi-Fi connecon on the app.
If the camera is offline, reset the camera, and then configure
the camera again.
Q: Connecon takes too long?
Check if the distance between the camera and the router,
and that between the camera and the smart phone is both
within 5 m (16.4 ) during the connecon.
Check the Wi-Fi configuraon of the router: Select the
channel to auto, and the mode to 11bgn mixed.
Q: When the micro SD card is full, how is the recorded video
saved?
When the micro SD card is full, the system will overwrite the
previous recorded videos. Save the important informaon in
me.
Q: Where are the recorded videos saved?
If you have acvated the cloud storage and installed a micro SD
card, the recordings will be both saved to the card and cloud. If
the cloud storage is deacvated, the recordings are saved to
the SD card. Videos recorded during live view or playback is
saved on your phone.
Q: The device is offline?
Check the indicator status:
Solid green: Check whether the router can connect to the
Internet. If the network is connected, restart the camera.
Flashing red: Reset the camera, and then configure the
camera again.
Solid red: The camera is faulty.
Mounng Surface
Mounng Adhesive
Camera
Mounng Surface
Mounng Template
Wall Anchor
Mounng Plate
Mounng Screws
Camera
1
2
3
4
5