KAT Ioco OWNER'S MANUAL This product is for home use ONLY and NOT for the commercial use. Thank you for purchasing our product! Please read this instruction manual carefully and keep it safely stored for future use.
INDEX First & Foremost Declaration 04 Health Warnings 07 Safety Instructions Laws and regulations Product Introduction 05 08 Product Description 12 Product Parameters 13 Product Appearance List of Items PC Based Software Description 12 17 Software Description 18 First Use Instructions 19 Contact Information 27 Product Warranty 27 Software Download 19
First & Foremost This owner's manual contains all the information you need to install and use KAT loco. This product is for home use ONLY and NOT for the commercial use. The following symbols are used to indicate useful and important information: This symbol is a precaution: It usually provides additional information to help with a task, as well as information that only applies to a certain situation. This symbol is a hint, letting you know what might be helpful at that particular point.
Declaration It is the trademark of Hangzhou Virtual and Reality Technology Co., Ltd. All trademarks, product identification and trade names of other companies appearing in this manual belong to their respective owners. No parts or content of this manual may be copied or reproduced without the written permission of the company, and may not be shared in any form or used for any commercial or profitable purpose. The contents of this manual are subject to change due to product upgrades or other reasons.
Safety Instructions To avoid personal injuries or damage to the product, read and follow all product safety and operation instructions before using KAT loco. Pay special attention to safety warnings. If you allow others to use the product, you are responsible for ensuring that each user knows and follows all product safety and operation instructions. To avoid injuries, read and follow all instructions before using the product. Suitable users: The device is intended for use by healthy people aged 14 to 60.
burning or stiffness, stop using the product and consult your doctor. Choking hazard: Do not leave small components that pose a suffocation hazard to children or pets in easily accessible places where they can reach. Product use: Keep the product safely away from liquids or containers holding liquids. Do not place the product near fire or heat sources, nor leave it directly exposed to the sun. Do not insert items into any openings of the product. Do not disassemble or modify this product or its accessories.
interfere with the operation of nearby electronic equipment. If you are wearing a pacemaker or any other implantable medical device, consult your doctor or your medical device manufacturer before using the product. In order to minimize radio frequency interference, use only accessories approved by the original manufacturer. Do not use at the same location, or together with any other antenna or transmitter. Avoid overuse: Avoid using the product for long periods of time without rest.
Pregnant women or those with epilepsy, cardiopulmonary diseases, history of mental illness (such as anxiety disorder, post-traumatic stress disorder etc), anemia or other serious health problems such as heart diseases, and those undergoing postoperative recovery or physical activity difficulties are strictly prohibited from using the product.
该文档是极速PDF编辑器生成， 如果想去掉该提示,请访问并下载： http://www.jisupdfeditor.com/ (1). This product must not be co-located or used together with any other antenna or transmitter. FCC Warnings This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help.
EU Directives Compliance Statement This device complies with the 2014/53/EU Directive issued for wireless electronics by the European Electronic Communications Committee. This equipment operates in the following frequency range and the highest radio frequency power. Electronic Waste and RoHS compliance This equipment should not be disposed in a landfill. Improper disposal of electronic products or their components may harm the environment.
Product Appearance 1 L Signal Light 2 W Signal Light R Signal Light 3 4 Calibration Button 6 USB Port 7 Antennae 5 Macro USB Port 12
Product Parameters Serial number LC01 Connection Bluetooth 4.2 Supported actions walking, moving backwards, strafing, turning around, crouching and using cruise control, etc. Suitable age Signal range Operating temperature Storage temperature Accepted humidity level Software Certificates Package size Gross weight 14-60 3m 0-40℃(32℉-104℉) -5℃ - 50℃(23℉- 122℉) - 5%-95% in non-condensing state KAT Gateway CB,CE,FCC,WEEE,RCM,IC 230*123*60mm (L*W*H,9.06*4.84*2.36in) 400g(14.11oz) 1.
Serial number Weight Waist sensor LC012 35g(1.23oz) Total thickness 24mm(0.94in) Battery capacity 370mAh Lithium Battery Charging voltage and current Lithium-ion Polymer Battery 5V 0.
Serial number Weight Ankle sensor LC011 35g(1.23oz) Diameter 50mm(1.97in) Battery Lithium-ion polymer battery Total thickness Battery capacity Charging voltage and current 24mm(0.94in) 370mAh 5V 0.5A(2A MAX) Charging time About 1 hour Lighting LED Battery life Housing material Velcro Straps length Adjustable length for Velcro Strap ≥10hrs ABS 20cm-35cm(7.87in-13.78in) 330mm±10mm(Optional accessary) Performance of the battery might vary depending on the frequency and method of use.
Serial number Weight Size Receiver LC013 80g(2.82oz) 112*99*74mm (4.41*3.90*2.91in) Housing material ABS Rated Voltage USB2.0 5V or above Port USB2.
Complete list of items in a KAT loco package Name Waist Sensor List of Items Look Quantity 1 Ankle Sensor 2 Receiver 1 Velcro Strap 2 Multifunctional USB Wire 1 USB Cable Owner's Manual Remarks 1 1 KAT Ioco OWNER'S MANUAL This product is for home use ONLY and NOT for the commercial use. Thank you for purchasing our product! Please read this instruction manual carefully and keep it safely stored for future use.
PC Based Software Description Software Description KAT Gateway is our comprehensive software solution dedicated to users of KAT loco for the device management, and VR games support. With Gateway you can quickly connect KAT loco to your computer to view current connection status of the device and run available VR content. Thanks to its inSteam Turbo Mode, each compatible game will be automatically launched with an optimal settings configuration.
Software Download Please use your browser to log in to the following website and download necessary software： https://www.katvr.com/pages/download First Use Instructions 01 01 Connecting: Take out the USB cable and the receiver, then connect it to your PC. Verify that the receiver is in good technical condition and launch the software.
02 02.Pairing: Launch KAT Gateway, click 'Device Manager', and select 'Pair Sensor'. Then, follow the instructions on the screen and connect the sensors to your PC one by one according to the prompts to complete the pairing.
L Signal Light R Signal Light 03. Waist sensor mag calibration: When used for the first time, the waist sensor requires to collect the location data to complete the calibration process. Select 'Waist Mag Calibration' in KAT Gateway and follow the instructions on the screen. In order to start the calibration process,select 'Waist Mag Calibration' in KAT Gateway and follow the instructions on the screen. Note: I Mag calibration should be carried out at the actual location of use.
I II L Signal Light Loop side facing the outside R Signal Light II. Distinguish the left and right ankle sensors according to their signal lights. III III. Fasten the velcro straps tightening their ends. Note: The correct spot on your leg to put the sensors on: 5cm(about 3 fingers length) above your ankle.
II. Warning: The picture above shows improper placement of the sensors. Puting the sensors on upside down will disable their normal operation. Note: I. When taking the sensors off, just unfasten the straps. II. Do not remove the velcros from the buckles. 05. Putting on the Waist sensor: I I. Gently pry open the sensor clip.
II II. When putting the sensor on, pay attention to the correct direction(The LED lights of the sensors should be directed upwards, while the charging port should face the floor). Note: I. If you let the sensor swing loosely, it may change position or drop affecting your walking direction. II. Make sure to fix the sensor firmly to avoid these problems. II. The picture with red cross shows improper placement of the waist sensor. 06.
I 1.5m 2m Note: II. Make sure to only use this product in a safe area with no obstacles. Do not use it near stairs, wide windows, heat sources, reservoirs and water tanks, outdoors or nearby any other objects that might pose a threat to your safety. Please make sure that there are no other people, furniture or any other things that hinder your movement in the selected play area. Pay special attention to children and pets. 07 07.
08. Parameter Adjustment: When within a game, you can adjust the parameter settings of the sensors to your liking. All adjustments such as sensor sensitivity to walking or the way of triggering special actions (such as strafing) can be made in' Controller Options' tab of KAT Gateway. Note: If your walking direction becomes deviated, firstly check if the waist sensor is in the correct position right in front of your waist.
Contact Information Phone Number: +86(0)571-86105373 E-mail Address: overseas@katvr.com Official Website: www.katvr.com Product Warranty Please check the warranty page for latest product warranty information and warranty application procedures. Should any unforeseen technical problem appear during the warranty period, please contact KAT VR or your local distributor. Please present the product receipt to the place of purchase or another place designated by KAT VR.
WARRANTY CARD Customer Information Name： Number： Address： Zip Code： Product Information Serial No： Name： Purchase Date： Warranty Period：ONE YEAR of free repair service Repair Records Service Date Device Issue Product Condition Check the terms and conditions of the warranty online： http://katvr.
