User's Manual

36 Starting Installation
Starting the Head-Mounted Display
Attention:
1.Before starting the computer, check if all the ports are in normal connection and if all power suppliers are in normal
states.
2. When starting the computer, the pairing between the base stations and the head-mounted display will be automatically
completed. The panel of the detection software Steam VR will automatically display on the lower right part of the
computer monitor.When all the five icons are on, it means the head-mounted display can work properly.
3.Turn on the KAT entertainment platform and key in the account username and password to complete the login.
Make sure the head-mounted display is properly debugged before the normal use
1.Adjust the head-mounted device to the position of eyes.
2.Wind the slide belt to the back of head and adjust it so that the device fixes to the head in a tight and comfortable way.
3.Make sure the cables go through the protection cover on the back of the head-mounted device and that they hang on
your back.
4.Adjust the lens distance on the head-mounted device; please refer to the manual for head-mounted display for
detailed adjustment steps.
Sensor Status Indicators
Blue OffRedLocation Indicator
KATVR-Central
Sensor
Wireless receiver Working indicator
Working indicator
KATVR-Central Sensor normal
power supply, not connected
to the back sensor
KATVR-Central Sensor
normal power supply,
connected to the
back sensor
Not connected to
the PC
KATVR-Foot
Sensor
Working indicator
Charging Indicator
Wireless receiver normal
power supply, not connected
to the KATVR-Foot Sensor
Wireless receiver normal
power supply, connected
to the KATVR-Foot Sensor
Not connected to
the PC
KATVR-Foot Sensor normal
power supply, not connected
to the wireless receiver
KATVR-Foot Sensor normal
power supply, connected to
the wireless receiver; the
flashing indicator indicates a
low charge level and please
timely charge it
The switch button is
not pressed or the
battery charge level
is too low
Being charged Fully charged
Not connected to
the charger