User's Manual

35 Starting Installation
Power Switch
Upon confirming the proper installation and connection of the product, press the power
button for all the devices
a.Check if the controllers are fully charged. You may check the controllers' battery charge level while not running any
program or upon opening the main control panel of the system. When the battery charge level is insufficient, the
indicator will display a red dot. Use the accessory power adapter and the USB data cable to charge each controller.
When the controllers are powered on and fully charged, the status indicator will display green color (powered on) or
white color (powered off).
b.Connecting base station to power
The base station needs continuous power supply when being used and it is advised to install a power socket near the
station.
c.The PC is Powered on
d.The foot sensor switch is ON
Press the red switch button on the side of the foot sensor, the red light indicates the foot sensor is activated, and the
blue light indicates that the foot sensor is connected with the wireless receiver normally.
e.The back sensor switch is ON
Press the red switch button on the side of the back of the sensor, the red light indicates that the back sensor is activated,
and the blue light indicates that the back sensor is connected with the central sensor.