Product Manual

WRD3L Datasheet
Hangzhou Tuya Information Technology Co., Ltd. 16 V2.0.1
6. Before SMT placement, take electrostatic discharge (ESD) protective measures.
7. To reduce the reflow defect rate, draw 10% of the products for visual inspection and
AOI before first SMT placement to determine a proper oven temperature and
component placement method. Draw 5 to 10 modules every hour from subsequent
batches for visual inspection and AOI.
7.4 Recommended Oven Temperature Curve
1. Perform SMT placement based on the following reflow oven temperature curve. The
highest temperature is 245°C.
Based on the IPC/JEDEC standard, perform reflow soldering on a module at most twice.