Data Sheet

6 ANTENNA INFORMATION
6 Antenna Information
6.1 Antenna Type
WB8P uses only an onboard PCB antenna.
6.2 Antenna Interference Reduction
To ensure optimal WiFi performance when the WiFi module uses an onboard PCB
antenna, it is recommended that the antenna be at least 15 mm away from other
metal parts. To ensure the antenna performance, the PCB should not be routed
or clad with copper in the antenna area. The main points of the layout: 1. Make
sure that there is no substrate medium directly below or above the printed antenna.
2. Make sure that the area around the printed antenna is far away from the metal
copper skin, so as to ensure the radiation effect of the antenna to the greatest
extent.
17 / 28