Product Manual

WB8P Datesheet
12
5 Antenna Information
5.1 Antenna Type
WB8P uses an on board PCB antenna.
5.2 Antenna Interference Reduction
To ensure optimal Wi-Fi performance when the Wi-Fi module uses an on board PCB antenna, it is
recommended that the antenna be at least 15 mm away from other metal parts. To prevent adverse
impact on the antenna radiation performance, avoid copper or traces along the antenna area on the
PCB. Deploy the antenna based on the antenna placement solutions shown in the following figures.
Figure 5-1 Antenna clearance part
5.3 Antenna Connector Specifications
WB8P does not use an antenna connector.