Product Manual

6
2 Module Interfaces
2.1 Dimensions and Footprint
WB1S has two rows of pins with a 2 mm pin spacing.
The WB1S dimensions (H x W x D) are 3.0 mm x 16 mm x 24 mm. Figure 2-1 shows the
WB1S front and rear views.
Note: The default dimensional tolerance is ±0.3 mm. If a customer has other requirements,
clearly specify them in the datasheet after communication.
Figure 2-1 WB1S front and rear views
2.2 Interface Pin Definition
Table 2-1 WB1S interface pins
Pin
No.
Symbol I/O
Type
Function
1 VCC P Power supply pin (3.3 V)