Product Manual

13
5 Antenna Information
5.1 Antenna Type
WB1S uses an onboard PCB antenna.
5.2 Antenna Interference Reduction
To ensure optimal Wi-Fi performance when the Wi-Fi module uses an onboard PCB
antenna, it is recommended that the antenna be at least 15 mm away from other metal
parts. To prevent adverse impact on the antenna radiation performance, avoid copper or
traces along the antenna area on the PCB. Deploy the antenna based on the antenna
placement solutions shown in the following figures.
Figure 5-1 Antenna clearance part
5.3 Antenna Connector Specifications
WB1S does not use an antenna connector.