Product Manual

ManualsBrandsHangzhou Tuya Information Technology ManualsElectronicsWIFI Module

Table Of Contents

TYLC6E Datasheet

1. Product Overview

TYLC6E is a low-power embedded Wi-Fi module that Tuya has developed. It consists of a

highly integrated RF chip (ESP8285) and several peripheral components, with an

embedded Wi-Fi network protocol stack and robust library functions. TYLC6E is

embedded with a low-power 32-bit CPU, 2 MB flash memory, and 50 KB static

random-access memory (SRAM), and has extensive peripherals.

TYLC6E is an RTOS platform that integrates all function libraries of the Wi-Fi MAC and

TCP/IP protocols. You can develop embedded Wi-Fi products as required.

1.1 Features

 Embedded low-power 32-bit CPU, which can also function as an application

processor



Dominant frequencies: 80 MHz and 160 MHz

 Working voltage: 3.0 V to 3.6 V

 Peripherals: five GPIOs



Wi-Fi connectivity

 802.11b/g/n

 Channels 1 to 14 at 2.4 GHz



WPA and WPA2 security modes

 Up to +20 dBm output power in 802.11b mode

 STA, AP, and STA+AP working modes



Smart and AP network configuration modes for Android and iOS devices

 External helical antenna with a gain of 1.0 dBi

 Working temperature: –20°C to +105°C

Tuya TYLC6E Wi-Fi Module

Version: 2.0.0

Date: 2019-07-22

No.: 0000000001

Product

Manual

Global Intelligent Platform

Summary of content (22 pages)

PAGE 1
Global Intelligent Platform TYLC6E Datasheet Tuya TYLC6E Wi-Fi Module Product Manual Version: 2.0.0 Date: 2019-07-22 No.: 0000000001 1. Product Overview TYLC6E is a low-power embedded Wi-Fi module that Tuya has developed. It consists of a highly integrated RF chip (ESP8285) and several peripheral components, with an embedded Wi-Fi network protocol stack and robust library functions.
PAGE 2
TYLC6E Datasheet 1.
PAGE 3
TYLC6E Datasheet Change History No. Date Change Description Version After Change 1 2019-03-19 This is the first release. 1.0.0 2 2019-07-24 Added GPIO information. 1.0.
PAGE 4
TYLC6E Datasheet Contents 1. Product Overview........................................................................................................................ 1 1.1 Features.............................................................................................................................. 1 1.2 Applications........................................................................................................................ 2 Tables.........................................................
PAGE 5
TYLC6E Datasheet 6.5 Storage Conditions......................................................................................................... 18 7 MOQ and Packing Information.................................................................................................19 8 Appendix: Statement..................................................................................................................
PAGE 6
TYLC6E Datasheet Tables Table 2-1 TYLC6E interface pins...........................................................................................7 Table 2-2 TYLC6E test pins....................................................................................................8 Table 3-1 Absolute electrical parameters.............................................................................9 Table 3-2 Normal electrical conditions..............................................................................
PAGE 7
TYLC6E Datasheet 2. Module Interfaces 2.1 Dimensions and Footprint TYLC6E has two rows of pins with a 2 mm pin spacing. The TYLC6E dimensions (HxWxD) are 3±0.1 mm x 12±0.15 mm x 14±0.15 mm. The PCB thickness is 1.0±0.1 mm. The shield cover height is 2.0±0.05 mm. Figure 2 shows the TYLC6E front and rear views. Figure 2-1 TYLC6E front and rear views 2.2 Interface Pin Definition Table 2-1 TYLC6E interface pins Pin No.
PAGE 8
TYLC6E Datasheet Pin No. Symbol I/O Type Function 6 GND P Power supply reference ground pin 7 GPIO4 I/O Used as a GPIO, which is connected to GPIO4 (pin 16) on the internal IC Note: P indicates power supply pins, and I/O indicates input/output pins. 2.3 Test Pin Definition Table 2-2 TYLC6E test pins Pin No.
PAGE 9
TYLC6E Datasheet 3. Electrical Parameters 3.1 Absolute Electrical Parameters Table 3-1 Absolute electrical parameters Parameter Description Minimum Value Maximum Value Unit Ts Storage temperature –40 125 °C VCC Power supply voltage –0.3 3.6 V Static electricity voltage (human body model) Tamb = 25°C N/A 2 kV Static electricity voltage (machine model) Tamb = 25°C N/A 0.5 kV 3.
PAGE 10
TYLC6E Datasheet Parameter Description Minimum Value Typical Value Maximum Value Unit VOH I/O high-level output VCC x 0.8 N/A VCC V Imax I/O drive current N/A N/A 12 mA 3.3 RF Current Table 3-3 Current during constant transmission and receiving Working Status TX Parameter Unit Mode Rate 802.11b 11 Mbit/s +17 dBm 220 mA 802.11g 54 Mbit/s +15 dBm 110 mA 802.11n MCS0 +14 dBm 120 mA 802.
PAGE 11
TYLC6E Datasheet 3.4 Working Current Table 3-4 TYLC6E working current Working Mode Working Status (Ta = 25°C) Average Value Maximum Value Unit EZ The module is in EZ mode, and the Wi-Fi indicator blinks quickly. 80 151 mA AP The module is in AP mode, and the Wi-Fi indicator blinks slowly. 90 451 mA Connected The module is connected to the network, and the Wi-Fi indicator is steady on. 58.
PAGE 12
TYLC6E Datasheet 4.2 TX Performance Table 4-2 Performance during constant transmission Parameter Minimum Value Typical Value Maximum Value Unit Average RF output power, 802.11b CCK mode 11 Mbit/s N/A 17 N/A dBm Average RF output power, 802.11g OFDM mode 54 Mbit/s N/A 14 N/A dBm Average RF output power, 802.11n OFDM mode MCS7 N/A 13 N/A dBm –10 N/A +10 ppm Frequency error EVM under 802.11b CCK 11 Mbit/s 17.5 dBm –15 dB EVM under 802.11g OFDM 54 Mbit/s 15.
PAGE 13
TYLC6E Datasheet An 11.5 mm antenna is recommended. Figure 5-1 shows the antenna dimensions. Figure 5-1 Antenna dimensions 5.2 Antenna Interference Reduction To ensure optimal Wi-Fi performance when the Wi-Fi module uses an external antenna, it is recommended that the antenna be at least 15 mm away from other metal parts. 5.3 Antenna Connector Specifications TYLC6E does not use an antenna connector.
PAGE 14
TYLC6E Datasheet 6. Packaging Information and Production Instructions 6.1 Mechanical Dimensions Figure 6-1 TYLC6E mechanical dimensions Note: The default dimensional tolerance is ±0.35 mm. If a customer has other requirements, clearly specify them in the datasheet after communication. 6.
PAGE 15
TYLC6E Datasheet Figure 6-3 PCB encapsulation diagram of TYLC6E 6.3 Production Instructions 1. Use an SMT placement machine to mount components to the stamp hole module that Tuya produces within 24 hours after the module is unpacked and the firmware is burned. If not, vacuum pack the module again. Bake the module before mounting components to the module. (1) SMT placement equipment i. Reflow soldering machine ii. Automated optical inspection (AOI) equipment iii.
PAGE 16
TYLC6E Datasheet Figure 6-4 HIC for TYLC6E 3. Bake a module based on HIC status as follows when you unpack the module package: (1) If the 30%, 40%, and 50% circles are blue, bake the module for 2 consecutive hours. (2) If the 30% circle is pink, bake the module for 4 consecutive hours. (3) If the 30% and 40% circles are pink, bake the module for 6 consecutive hours. (4) If the 30%, 40%, and 50% circles are pink, bake the module for 12 consecutive hours. 4.
PAGE 17
TYLC6E Datasheet 6.4 Recommended Oven Temperature Curve Perform SMT placement based on the following reflow oven temperature curve. The highest temperature is 245°C. Based on the IPC/JEDEC standard, perform reflow soldering on a module at most twice.
PAGE 18
TYLC6E Datasheet 6.
PAGE 19
TYLC6E Datasheet 7 MOQ and Packing Information 19
PAGE 20
TYLC6E Datasheet 8 Appendix: Statement Federal Communications Commission (FCC) Declaration of Conformity FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules.
PAGE 21
TYLC6E Datasheet This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator and your body. Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
PAGE 22
TYLC6E Datasheet EN 300 328 V2.1.1 EN 301 489-1 V2.1.1; EN 301 489-17 V3.1.