User's Manual

have any responsibility for final product compliance.
c) If the investigation indicates a compliance concern the host product manufacturer is
obligated to mitigate the issue. Host products using a modular transmitter are subject to
all the applicable individual technical rules as well as to the general conditions of
operation in Sections 15.5, 15.15, and 15.29 to not cause interference. The operator of
the host product will be obligated to stop operating the device until the interference has
been corrected
Below are steps for TX verification：
tx_contin_en 1 // return：wifi tx continuous test!
wifitxout < parameter 1> < parameter 2> < parameter 3>
< parameter 1>：Send channel option and allowed number is 1~11.
< parameter 2>：Send data rate option, the relationship between input parameters and
rates is shown in table 1.
< parameter 3>：Send power attenuation, which is 8 bits directed number and 0.25 dB
unit.
for，4 equals power decrease 1dB，252 equals power increase 1dB。
TYLC5
User manual
Table 1: allowed input for speed of receiving or sending data package
11b mode 11g mode 11n mode
Input Dial Speed Input Dial Speed Input Dial Speed
0x0 1M 0xb 6M 0x10 6.5M / MCS0
0x1 2M 0xf 9M 0x11 13M / MCS1
0x2 5.5M 0xa 12M 0x12 19.5M / MCS2