Specifications

TYBT2 ,TYBT2-IPEX UserManual
Version1.0.0
4
Note: P: Power supply pins; I/O: Digital input or output pins.
SW pin is ONLY used for burning firmware, Can NOT be used for other functions.
While Pin4 and Pin12 are used for I2C functions, external 4.7k pull-up resistances are necessary.
When WW pin is outputt
ing PWM signal, It has opposite phase comparing the PWM
signal from R/G/B/CW pin.
If there’s any
customization needed for PWM output, please contact our BD manager.
3. Electrical Characteristics
3.1 Absolute
Maximum Ratings
Table 2. Absolute Maximum Ratings
PARAMETERS
DESCRIPTI
ON
MIN MAX UNIT
Ts
Storage
temperature
-20 85 ℃
VCC
Supply
voltage
-0.3 3.9 V
Electrostatic release quantity
(Human body model)
TAMB-25℃ - 2 KV
Electrostatic release quantity
(Machine model)
TAMB-25℃ - 0.5 KV
3.2
Electrical Conditions
Table 3. Electrical Conditions
Paramet
ers
Description Min Typ Max Unit
Ta
Temperature for
Commercial grade
-20 - 85 ℃
VCC Supply voltage 2.5 3.3 3.6 V
VIL
IO negative level
input
-0.3 - VCC*0.25 V
VIH
IO positive level
input
VCC*0.75 - VCC V
VOL
IO negative level
output
- - VCC*0.1 V
VoH IO positive level VCC*0.8 - VCC V