Product Specs

ManualsBrandsHangzhou Tuya Information Technology ManualsElectronicsT&H Sensor

Guidance for TT001-ZA T&H sensor Application

Product Specification for TT001-ZA

T&H sensor

1. Product Profile

1.1 Overview

As a low-cost product solution developed by Hangzhou Tuya Information Technology

Co., Ltd. based on the Zigbee module (TYZS2), the TT001-ZA T&H sensor can help

clients realize mass production in a short time.

1.2 Application Framework

2. Product Specification

2.1 Basic Parameters

 Name:T&H sensor

 Mode

l: TT001-ZA

 Supported mobile phone operating systems: Android 4.0+; iOS 7.0+

 Battery type: 3V CR2032

1 / 5

Summary of content (5 pages)

PAGE 1
Guidance for TT001-ZA T&H sensor Application Product Specification for TT001-ZA T&H sensor 1. Product Profile 1.1 Overview As a low-cost product solution developed by Hangzhou Tuya Information Technology Co., Ltd. based on the Zigbee module (TYZS2), the TT001-ZA T&H sensor can help clients realize mass production in a short time. 1.2 Application Framework 2. Product Specification 2.1 Basic Parameters     Name:T&H sensor Model: TT001-ZA Supported mobile phone operating systems: Android 4.
PAGE 2
Guidance for TT001-ZA T&H sensor Application 2.2 Technical Indexes Item Parameter Transport protocol: Zigbee Wireless frequency: 2.4 GHz Working voltage: 3.
PAGE 3
Guidance for TT001-ZA T&H sensor Application 3. Product Features 3.1 Indicator Light and Status Switching Item Description Power on The blue light is steady on for 5s Distribution network state The blue light fast flashes (200 ms) Working mode The blue light is steady off Data report The blue light is steady off 3.2    3.3 Data report Frequency Report frequency: The ambient temperature and humidity are detected every 5 minutes. When the temperature change is over 0.
PAGE 4
Guidance for TT001-ZA T&H sensor Application 3.6 FunctionalCharacteristics Item Description Activity detection Monitor the temperature and humidity data in your room. Push After message push is enabled on the APP, if the data exceeds the threshold, the cloud will push a message to the mobile phone through the Zigbee gateway. Battery energy detection Battery energy report Linkage Add a product for linkage through the APP (e.g. intelligent light or curtain) and configure options.
PAGE 5
Guidance for TT001-ZA T&H sensor Application 4. Product Packaging 4.1 PackagingMaterials 1. Temperature and humidity sensor 2. Reset pin 3. Manual 4. Battery FCC Statement Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules.