Product Manual

BT7L-IPEX Datasheet
13
5.2 Antenna Interference Reduction
To ensure optimal RF performance, it is recommended that the antenna be at least 15 mm
away from other metal parts. If metal materials are wrapped around the antenna, the
wireless signals will be reduced greatly, deteriorating the RF performance. Because
BT7L-IPEX is inserted to the PCB, sufficient space needs to be reserved for the antenna.
6 Packaging Information and Production Instructions
6.1 Mechanical Dimensions
Figure 6-1 BT7L-IPEX mechanical dimensions
Note:
The default dimensional tolerance is ±0.35 mm, and the tolerance for some