User's Manual

INDOOR HOTSPOT User’s Manual V1.0
Configuring Indoor Hotspot
To configure your Hotspot, you will require the Helium Network
application installed on a Mobile Phone, and for you to have gone
through the account setup process to continue.
Prerequisites：
 Ready to connect the hotspot
 Helium application with account
Operating Steps：
 Step 1: Open the Helium application and login, then press + Add
a Hotspot.
 Step 2: Next click Set up Hotspot, from here you will want to
select Indoor Hotspot.
 Step 3: Place your hotspot in appropriate location, please
reffer Ideal Hotspot Placement.
 Step 4: Accept diagnostics permission , This will allow
HangZhou ShuLian Ltd to identify issues with your Hotspot in
a secure way.
 Step 5: Power Up the hotspot, and please note that never power
on the Indoor hotspot without it’s antenna connected as this
may damage the unit.。
 Step 6: Turn on your phone's Bluetooth and pair the hotspot.
 Step 7: Select your hotspot in the app, you can check it is the
correct one by matching the last 6 characters shown in the
application with the last 6 characters of the mac address
printed on the sticker on the bottom of the hotspot.
 Step 8: Next you need to submit antenna height and power
details.
 Step 9: Provide location permission: The helium application
use phone location to assert location to the device.
 Step 10: Finally, you can confirm the location of your hotspot.
Click continue and you should be presented with a map to then
place where your hotspot is on the app. This requires $10 and
it’s alredy paid by ShuLian LTD.
 Step 11: The setup should now be complete, it’ll submit the
details of the Hotspot to the Helium network and then in
approximately 15 minutes confirm it’s added to the network.
Attention
：You can move device to another location, However every time
you move your hotspot to a new location you will need to pay the $10
location assert fee again.
5